e-mechatronics.com

e-mechatronics.com is YASKAWA's products and technical information website

  • YASKAWA
e-mechatronics Character
Home >  Products >  Controllers >  MP2300 Specifications

Controllers

MP2300[ JEPMC-MP2300 ]

MP2300

The MP2300 is a compact and all-in-one machine controller.

The MP2300 is an All-in-One Machine Controller that provides many functions that can be used flexibly by the customer to develop the ideal system for the machine.



MECHATROLINK

Specifications

General Specifications
Items Specifications
Environmental Conditions Operating Temperature 0°C to +55°C
Storage Temperature –20°C to +85°C
Operating Humidity 30% to 95% (non-condensing)
Storage Humidity 5% to 95% (non-condensing)
Corrosive Gas No combustible or corrosive gas
Operating Altitude 2,000m above sea level or lower
Electrical Operating Conditions
Noise Resistance Conforming to JIS B3502
Power supply noise (FT noise): 2kV or larger for 1 min.
Radiation noise (FT noise): 2kV or larger for 1 min.
Gland noise (Impulse noise): 1kV or larger for 10 min.
Static noise (Aerial discharge):
8kV or larger for 10 times
Mechanical
Operating
Conditions
Vibration Resistance Conforming to JIS B3502
1)Frequency: 16.7Hz
Vibration acceleration: 14.7m/s2
2 hours in each direction (X, Y, and Z)
2)Frequency: 10Hz to 57Hz
Vibration amplitude: Single-amplitude of 0.075mm
3)Frequency: 57Hz to 150Hz
Vibration acceleration: a fixed acceleration of 9.8m/s2
Shock Resistance Peak acceleration of 294m/s2(30G) twice for 11ms each in directions X, Y, and Z
Installation Requirements Ground Ground to 100Ω or less
Cooling Method Natural cooling

MP2300 Basic Module
Items Specifications
Power Supply Input supply voltage: 24VDC±20%
Current consumption: 1A
Inrush current: 40A or less
Motion Network One circuit for MECHATROLINK-II:
Twenty-one stations, including servo drives and I/O equipment, can be connected. (16 axes for servo drives)
Transmission speed: 10Mbps (MECHATROLINK-II)
Maximum segment length: 50m
I/O Signals Direct input: 8 points (One point can be used for interrupts),
24VDC, 4mA, and source mode or sink mode input
Direct output: 4 points, 24VDC, 100mA, open collector, and sink mode output
Slot for Optional Modules 3 slots


Search this site

Guide

Service & Support

Guide

Download

After-sales Service(Troubleshoot and Maintenance)





Copyright(C)2001-2011 YASKAWA ELECTRIC CORPORATION. All Rights Reserved.